Bylaw 14127
January 11, 2006
The purpose of this Zone is to provide for manufacturing, processing, assembly, distribution, service and repair Uses that carry out a portion of their operation outdoors or require outdoor storage areas. Any nuisance associated with such Uses should not generally extend beyond the boundaries of the Site. This Zone should normally be applied on the interior of industrial areas adjacent to collector and local industrial public roadways such that Uses are separated from any adjacent residential areas by a higher quality Industrial or Commercial Zone.
Animal Hospitals and Shelters
Equipment Rentals
Fascia Off-premises Signs, where they are not within 100.0 m of a Residential Zone
Freestanding Off-premises Signs, where they are not within 100.0 m of a Residential Zone
Roof On-premises Signs, where they are not within 100.0 m of a Residential Zone
Auctioneering Establishments
Fascia Off-premises Signs,where they are within 100.0 m of a Residential Zone
Freestanding Off-premises Signs, where they are within 100.0 m of a Residential Zone
Bylaw 15892
October 11, 2011
Bylaw 15892
October 11, 2011
Bylaw 15892
October 11, 2011
Bylaw 15892
October 11, 2011
Roof Off-premises Signs
Roof On-premises Signs, where they are within 100.0 m of a Residential Zone
The maximum Floor Area Ratio shall be 2.0.
Bylaw 15735
June 20, 2011
A minimum Setback of 3.0 m shall be required where any lot line of a Site abuts a public roadway, other than a Lane. If any lot line of the Site abuts a property line of a Residential Zone, a minimum Setback of 6.0 m shall be required.
Bylaw 15735
June 20, 2011
No parking, loading, storage, trash collection, outdoor service or display area shall be permitted within a Setback.
The maximum Building Height shall be 18.0 m.
Signs shall comply with the regulations found in Schedule 59G.