The purpose of this Zone is to establish a high quality Industrial Zone for those manufacturing, processing, assembly, distribution, service and repair Uses that carry out a portion of their operation outdoors or require outdoor storage areas. In general, any nuisance factor associated with the Uses in this Zone shall not extend beyond the boundaries of the Site and these Sites shall be located on Interior Sites adjacent to local industrial public roadways, such that these Uses are separated from nearby residential and community zones by a higher quality industrial business zone.
Bylaw 18171
September 11, 2017
Charter Bylaw 18613
November 26, 2018
Bylaw 12961
February 4, 2002
Bylaw 17403
October 19, 2015
Effective date: February 1, 2016
Charter Bylaw 18613
November 26, 2018
Bylaw 17901
March 6, 2017
Bylaw 17403
October 19, 2015
Effective date: February 1, 2016
Bylaw 15892
October 11, 2011
Bylaw 15892
October 11, 2011
Bylaw 15892
October 11, 2011
the maximum Floor Area Ratio shall be 2.0;
Bylaw 15735
June 20, 2011
a minimum Setback of 3.0 m shall be required where any lot line of a Site Abuts a public roadway, other than a Lane;
Bylaw 15735
June 20, 2011
all Setbacks shall be Landscaped in accordance with Section 55 of this Bylaw;
Bylaw 15735
June 20, 2011
no parking, loading, storage, trash collection, outdoor service or display area shall be permitted within a Setback;
all display and storage areas that Abut any Zone other than an Industrial Zone shall be screened in accordance with the provisions of subsection 55.4(4) of this Bylaw;
Bylaw 17727
August 22, 2016
any trash collection area, open storage area, or outdoor service area, including any loading, unloading or vehicle service area that is visible from any adjoining Site shall be screened from view from the adjoining Site. Landscaping, planting, berming, masonry walls, wood Fencing or other man made features shall be provided from the ground to a Height of 1.8 m to block the view from an adjoining Site;
the maximum building Height shall be 18.0 m;
lighting for display, storage and parking areas shall be mounted on lamp standards or building walls and no exposed bulbs or strings of lights shall be used. Lighting shall be in accordance with Section 51 of this Bylaw;
Signs shall comply with the regulations found in Schedule 59J; and
all developments shall comply with the Performance Standards of Section 57 for the IM Zone.
Bylaw 17403
October 19, 2015
Effective date: February 1, 2016
Urban Indoor Farms shall comply with Section 98 of this Bylaw.
Bylaw 17403
October 19, 2015
Effective date: February 1, 2016
Urban Outdoor Farms shall comply with Section 98 of this Bylaw.