Bylaw 17410
October 19, 2015
The purpose of this Zone is to provide the opportunity for more efficient utilization of suburban areas through increased density of Single Detached Housing and by eliminating the requirement of one Side Setback per lot.
Limited Group Homes
Minor Home Based Business
Secondary Suites
Single Detached Housing
Fascia On-premises Signs
Except as expressly modified in Subsection 3(c) herein, the development regulations specified in the RSL Zone of this Bylaw shall regulate development of Single Detached Housing with front attached Garage in this Zone.
Except as expressly modified in Subsection 3(d) herein, the development regulations specified in the RPL Zone of this Bylaw shall regulate development of Single Detached Housing with rear detached Garage in this Zone.
The following development regulations shall apply to the development of Single Detached Housing with front attached Garage:
The minimum Site Area shall be 240 m2 for each Dwelling.
The minimum Site Width shall be 7.6 m. The Site Width for a pie shaped Lot shall be measured 9 m into the Site from the Front Lot Line.
The maximum Height shall not exceed 10.0 m nor 2 storeys.
The maximum total Site Coverage shall not exceed 50%, inclusive of the attached Garage and any other Accessory Buildings.
The Side Setback shall be a minimum of 1.2 m.
On a Corner Lot where the building fronts a public roadway, the minimum Side Setback abutting the flanking public roadway other than a Lane shall be 2.4 m.
The minimum Side Setback abutting a walkway or a Lane shall be 1.2 m.
One Side Setback may be reduced to zero metres where:
the other Side Setback is a minimum 1.5 m;
the owner of the Site proposed for development and the owner of the adjacent Site register, against both titles, a minimum 1.5 m private maintenance easement that provides:
a 0.30 m eave encroachment easement with the requirement that the eaves shall be closer than 0.90 m to the eaves on the adjacent building;
a 0.60 m footing encroachment easement; and
contemplates sufficient access for maintenance; and
all roof drainage from the building shall be discharged through eaves troughs and downspouts connected to the storm sewer service of the parcel on which the building is located. The applicant shall submit a detailed drainage plan showing the proposed drainage of the Site (including swale where required) for approval by the Development Officer in consultation with the Drainage Services Branch.
The following development regulations shall apply to the development of Single Detached Housing with rear detached Garage:
The minimum Site area shall be 240 m2.
The minimum Site Width shall be 7.6 m.
The minimum Site Depth shall be 30.0 m.
The maximum Height shall not exceed 10.0 m nor 2 Storeys.
The minimum Front Setback shall be 3.0 m.
The minimum Side Setback shall be 1.2 m.
Notwithstanding 3.d.vi. The minimum Side Setback abutting a public roadway other than a Lane shall be 20% of the Site Width or 2.4 m, whichever is greater.
One Side Setback may be reduced to zero metres where:
the other Side Setback is a minimum 1.5m;
the owner of the Site proposed for development and the owner of the adjacent Site register, against both titles, a minimum 1.5 m private maintenance easement that provides:
a 0.30 m eave encroachment easement with the requirement that the eaves shall not be closer than 0.90 m to the eaves on the adjacent building;
a 0.60 m footing encroachment easement; and
contemplates sufficient access for maintenance;
the Sites are graded for split surface drainage; and
all roof drainage from the building is discharged through eaves troughs and downspouts onto the parcel on which the building is located.
The maximum total Site Coverage shall not exceed 50% with a maximum of 35% for a principal building, and a maximum Site Coverage of 17% for Accessory buildings. Where a Garage is attached to or designed as an integral part of a Dwelling, the maximum Site Coverage for the principal building shall be 50%.